Product introduction

The Z16D device has excellent performance. Its maximum working height is 18 meters, the maximum platform height is 16 meters, the platform can carry 680 kilograms, and the extended platform can bear 230 kilograms. The equipment length (without/with outriggers) is 2.28 meters, the width is 3.25 meters, the retraction height is 2.56 meters, the wheelbase is 2.84 meters, and the minimum ground clearance is 0.23 meters. The platform dimensions are 3.95×1.83 meters, and the extension dimensions are 1.22/1.52 meters. The minimum turning radius is 2.78/4.95 meters, the walking speed when fully reduced is 6.3 km/h, the lifting speed is 1.1 km/h, the maximum allowable working Angle is 3°, and the climbing gradient is 21.8° (40%). Equipped with 33× 12-20 solid tires, weighing 8,850 kilograms, with a fuel tank capacity of 115 liters and a hydraulic tank capacity of 170 liters. It adopts a 4×4×2 drive mode and is equipped with the Yanmar 4TNV94L-B ×PHZ engine, with a rated power of 35.5Kw at 2600 rpm.

Z16D as an aerial work platform, makes many difficult and dangerous tasks easier, such as indoor and outdoor cleaning (ceilings, curtain walls, glass windows, eaves, canopies, chimneys, etc.), installation and maintenance of billboards, installation and maintenance of street lights and traffic signs, construction of building site, etc. The characteristics of our Z16D are flexibility and convenience. You can use a lifting platform instead of scaffolding to reach the height you need and solve your problem. At the same time, it can also save you costs and valuable time. It is especially suitable for aerial continuous working in large areas such as airport terminals, stations, docks, shopping malls, sports venues, residential properties, and factory workshops.

Z16D self-propelled scissor lift has the function of automatic walking, which can walk quickly and slowly under different working conditions. Only one person is required to operate the machine continuously during aerial operations, such as lifting, moving forward, moving backward, and turning. This greatly improves work efficiency compared to traditional hydraulic platforms, reducing the number of operators and labor intensity.

The machine is equipped with a horizontal alarm. When the machine tilts beyond a safe angle, it automatically enters the protection system and only allows the machine to lowering the platform. Only when it reaches a safe state can it be used normally. And Z16D aerial work platform is equipped with an oil pipe explosion-proof system at each oil cylinder.

Z16D only requires one person to operate, and all movements are controlled by the operating handle on the platform. The motor is continuously variable, effectively extending the service life of the battery and motor, and the motor only consumes energy during operation. The walking hydraulic system adopts a closed variable pump control system, which effectively improves system efficiency. Regardless of the position of the boom, the work platform can safely walk; The walking speed decreases as the lifting height increases.