T5010
The T4018 telescopic boom fork has strong loading performance. Its maximum lifting height is 17.6 meters, with a load capacity of 4,000 kilograms and an outward extension of 12.8 meters. The length from the body to the bracket is 6.4 meters, the length to the fork face is 7.62 meters, the width is 2.4 meters, the height is 2.55 meters, the wheelbase is 3.15 meters, the empty load capacity is 11,870 kilograms, and it is equipped with 440/80-24 tubeless tires and 1220×125×50 mm forks. The operation is highly efficient, taking 16 seconds to rise and 12 seconds to descend, etc. In terms of power, it is equipped with a cummins/Yuchai engine, with a power output of 114 Hp / 85 kW, a torque of 400 Nm at 1400 rpm, and a full-load pull force of 7850 daN. The transmission is a torque converter with 4 front gears and 4 reverse gears. The speed is 40 km/h. The braking system includes automatic air cut-off parking and wet multi-plate brakes for both the front and rear axles.
Hydraulic gear pump, flow rate 167 l/min, pressure 265 bar. For the fuel tank, the engine oil is 5.5L, the hydraulic oil is 70L, and the fuel tank is 95L. The noise and vibration control is excellent, with 79 dB for the driver’s seat and 106 dB for the environment. The hand/arm vibration is less than 2.50 m/s². 2 front and 2 rear wheel steering drive, safe cab certified by FOPS Level 2.
Product introduction
The T4018 telescopic boom fork has strong loading performance. Its maximum lifting height is 17.6 meters, with a load capacity of 4,000 kilograms and an outward extension of 12.8 meters. The length from the body to the bracket is 6.4 meters, the length to the fork face is 7.62 meters, the width is 2.4 meters, the height is 2.55 meters, the wheelbase is 3.15 meters, the empty load capacity is 11,870 kilograms, and it is equipped with 440/80-24 tubeless tires and 1220×125×50 mm forks. The operation is highly efficient, taking 16 seconds to rise and 12 seconds to descend, etc. In terms of power, it is equipped with a cummins/Yuchai engine, with a power output of 114 Hp / 85 kW, a torque of 400 Nm at 1400 rpm, and a full-load pull force of 7850 daN. The transmission is a torque converter with 4 front gears and 4 reverse gears. The speed is 40 km/h. The braking system includes automatic air cut-off parking and wet multi-plate brakes for both the front and rear axles.
Hydraulic gear pump, flow rate 167 l/min, pressure 265 bar. For the fuel tank, the engine oil is 5.5L, the hydraulic oil is 70L, and the fuel tank is 95L. The noise and vibration control is excellent, with 79 dB for the driver’s seat and 106 dB for the environment. The hand/arm vibration is less than 2.50 m/s². 2 front and 2 rear wheel steering drive, safe cab certified by FOPS Level 2.
T5010 telescopic boom forklift: A solid support for industrial handling
In the field of industrial material handling, the T5010 telescopic boom forklift, with its outstanding performance, stable design and reliable safety configuration, has become a key equipment for many enterprises to enhance operational efficiency and quality.
Super strong load-bearing and working capacity
The T5010 boasts an impressive load-bearing capacity, with a maximum lifting capacity of up to 5000 kilograms, making it capable of easily handling various heavy cargo handling tasks. Its maximum lifting height reaches 9.8 meters and the maximum working radius is 4.5 meters. Whether it is stacking high-rise goods or loading and unloading materials over a large area, it can handle it with ease and meet diverse operation requirements.
Stable and reliable structural design
In terms of vehicle dimensions, the length from the entire vehicle to the fork surface is 7.62 meters, the width is 2.4 meters, the height is 2.55 meters, the track length is 3.15 meters, and the ground clearance is 0.38 meters. This design ensures that the forklift can travel smoothly under different terrain conditions and has good passability. The external turning radius is 4.1 meters. Combined with two front wheels and two rear wheels for steering, it can steer flexibly even in narrow Spaces. Semi-solid tires, standard specification 16/70-24, offer excellent grip and durability. The fork is 1220mm in length, 125mm in width and 50mm in cross-section. It is sturdy and durable, and can firmly grasp various goods. The empty load weight of the vehicle (including the forks) reaches 12,800 kg, demonstrating its solid structure and reliable quality.
Efficient and smooth job performance
The T5010 is also excellent in terms of working speed. Although the lifting time is 18 seconds, for its strong carrying capacity, this speed can ensure the stable lifting of goods. The descent process lasted 14.4 seconds, the extension 17.9 seconds, the retraction 16.5 seconds, the forward tilt 5.1 seconds, and the backward tilt 4 seconds. All the movements were closely coordinated, effectively shortening the operation cycle and greatly improving the work efficiency.
Strong and stable power and transmission
The power system is the core highlight of the T5010. It is equipped with Cummins or Yuchai brand engines, model YCD4J22T-125, which complies with the national II standard. The engine is equipped with 4 cylinders, with a total displacement of 4400 cm³, a rated power of 122 Hp (91 kW), a maximum torque of 400 Nm @ 1400 rpm, and a full-load traction force of 10,000 daN. The power output is strong and stable, capable of handling various heavy loads and complex working conditions.
When lowering the loading system, the telescopic arm is automatically retracted.Thus, the load is always guided as close to the vehicle as possible and critical situations do not occur even with maximum payloads.
When lifting and lowering the loading system, the attachment is moved up and down in a vertical line, i.e. the telescopic arm automatically extends and retracts and the load is moved up or down in a straight line.down. Thus, the load always remains in the safe area and stacking at high heights is simplified.
In manual mode, the machine does not perform automatic movements of the loading system.
Basic Information
The T5010 telescopic boom forklift is specially designed for industrial material handling. Model T5010 can effectively enhance operational efficiency and quality.
Load-bearing and operational capacity
1)Strong load-bearing capacity: With a maximum lifting capacity of 5000 kg, it can easily handle all kinds of heavy goods.
2)Height and range: The maximum lifting height is 9.8m, and the maximum working radius is 4.5m, which can meet the diverse operation requirements such as stacking goods at high levels and handling materials over a large area.
Structural Design
1)Dimensions and passability: The length from the vehicle to the fork surface is 7.62 meters, the width is 2.4 meters, the height is 2.55 meters, the track length is 3.15 meters, and the ground clearance is 0.38 meters, ensuring smooth driving on different terrains and having good passability.
2)Steering flexibility: With an external turning radius of 4.1 meters, two front wheels and two rear wheels for steering, it can steer flexibly even in narrow Spaces.
3)Tire performance: Semi-solid tires are adopted, with standard specifications of 16/70-24, providing strong grip and durability.
4)The forks are sturdy: They are 1220mm in length, 125mm in width and 50mm in cross-section, capable of firmly grasping various goods.
5)Stable vehicle body: Empty load weight (including forks) 12,800 kg, with a solid and reliable structure.
Work Performance
1)Lifting and lowering: Lifting time 18 seconds, capable of stably lifting heavy objects. The descent process lasted 14.4 seconds, which was smooth and rapid.
2)Stretching and retraction: Stretch for 17.9 seconds, retraction for 16.5 seconds, with smooth movements.
3)Forward tilt and backward tilt: Forward tilt for 5.1 seconds, backward tilt for 4 seconds. All actions are closely coordinated to shorten the operation cycle and improve work efficiency.
Power and Transmission
1)Strong power: Equipped with Cummins or Yuchai YCD4J22T-125 engines, it complies with National II standards. The total displacement of the 4 cylinders is 4400 cm³, the rated power is 122 Hp (91 kW), the maximum torque is 400 Nm @ 1400 rpm, and the full-load traction force is 10,000 daN. It has sufficient power to handle heavy loads and complex working conditions.
Smooth transmission: It adopts a hydraulic torque converter transmission system, featuring 4 forward gears and 4 reverse gears, with a maximum driving speed of 40 km/h. The gear shifting is smooth and the operation is convenient.
Safety and Comfort
1)Reliable braking: The parking brake is an automatic air cut-off brake, and the service brake is a wet multi-plate brake for the front and rear axles, which is rapid and reliable.
2)Safety protection: Equipped with an FOPS Level 2 safety cab, it provides comprehensive safety protection for operators.
3)Comfort experience: The driver’s seat noise (LpA) is 82 dB, the vibration of the hand/arm is less than 2.50 m/s², reducing the fatigue of the operator and creating a good working environment.
NONE
